SDS6000A Series Archives - Siglent https://siglentna.com/videos/digital-oscilloscopes/sds6000a-series/ Siglent Technologies America, Inc Thu, 06 Oct 2022 19:02:25 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://siglentna.com/wp-content/uploads/2025/04/cropped-512X512.1-32x32.png SDS6000A Series Archives - Siglent https://siglentna.com/videos/digital-oscilloscopes/sds6000a-series/ 32 32 SDS Sequence mode: Stop after end frame is reached https://siglentna.com/video/sds-sequence-mode-stop-after-end-frame-is-reached/ Thu, 06 Oct 2022 18:59:39 +0000 https://siglentna.com/?post_type=videos&p=32195 Many SIGLENT SDS series oscilloscopes feature Sequence mode, which can be used to capture multiple trigger events that can be replayed like frames in a movie. In this video, we show how to use SINGLE trigger mode to stop acquisition after the user-defined sequences have been captured.

The post SDS Sequence mode: Stop after end frame is reached appeared first on Siglent.

]]> Many SIGLENT SDS series oscilloscopes feature Sequence mode, which can be used to capture multiple trigger events that can be replayed like frames in a movie.

In this video, we show how to use SINGLE trigger mode to stop acquisition after the user-defined sequences have been captured.

The post SDS Sequence mode: Stop after end frame is reached appeared first on Siglent.

]]> VNC Viewer for easy LAN control of multiple instruments https://siglentna.com/video/vnc-viewer-for-easy-lan-control-of-multiple-instruments/ Thu, 06 Oct 2022 13:31:21 +0000 https://siglentna.com/?post_type=videos&p=32172 In this video, I connect an SDS6000A series oscilloscope and SDG7000A series arbitrary waveform generator to a computer using a LAN and highlight some of the features of a commercially available VNC(r) software tool. If you are remotely monitoring instrumentation, these types of tools can be very helpful in displaying information.

The post VNC Viewer for easy LAN control of multiple instruments appeared first on Siglent.

]]> In this video, I connect an SDS6000A series oscilloscope and SDG7000A series arbitrary waveform generator to a computer using a LAN and highlight some of the features of a commercially available VNC(r) software tool.

If you are remotely monitoring instrumentation, these types of tools can be very helpful in displaying information.

The post VNC Viewer for easy LAN control of multiple instruments appeared first on Siglent.

]]> SDS6000A Introduction https://siglentna.com/video/sds6000a-introduction/ Wed, 13 Oct 2021 01:28:00 +0000 https://siglentna.com/?post_type=videos&p=22522 The post SDS6000A Introduction appeared first on Siglent.

]]>

The post SDS6000A Introduction appeared first on Siglent.

]]> Power Supply design: Testing! Not Guessing! https://siglentna.com/video/power-supply-design-testing-not-guessing/ Thu, 22 Apr 2021 13:03:19 +0000 https://siglentna.com/?post_type=videos&p=20891 In this video, Thomas Rottach from SIGLENT EU presents information on overcoming common power supply design issues through different testing methods. The first presentation of this material was at the Power Electronics Forum @ virtual Electronica 2020.

The post Power Supply design: Testing! Not Guessing! appeared first on Siglent.

]]> In this video, Thomas Rottach from SIGLENT EU presents information on overcoming common power supply design issues through different testing methods.

The first presentation of this material was at the Power Electronics Forum @ virtual Electronica 2020.

The post Power Supply design: Testing! Not Guessing! appeared first on Siglent.

]]> Oscilloscope Search and Navigate example: Quickly identify dirty power/brown out on the power line https://siglentna.com/video/search-and-navigate-dirty-power/ Fri, 01 May 2020 18:32:24 +0000 https://siglentna.com/?post_type=videos&p=17651 In this video, we use the Search and Navigate feature of the SIGLENT SDS2X Plus scope to isolate and indicate low voltage conditions of an input signal. Here, we use an SDG signal generator to produce a 60 Hz sine wave and we introduce a few periods of much lower voltage.. simulating dirty power/brownout conditions … Continued

The post Oscilloscope Search and Navigate example: Quickly identify dirty power/brown out on the power line appeared first on Siglent.

]]> In this video, we use the Search and Navigate feature of the SIGLENT SDS2X Plus scope to isolate and indicate low voltage conditions of an input signal.

Here, we use an SDG signal generator to produce a 60 Hz sine wave and we introduce a few periods of much lower voltage.. simulating dirty power/brownout conditions and then use the oscilloscope Search and Navigate function to find these fault conditions in a long time duration scan. This shows how you can use your scope to find that “needle in a haystack”. Short events (ms of duration) in large data sets.

The post Oscilloscope Search and Navigate example: Quickly identify dirty power/brown out on the power line appeared first on Siglent.

]]> Power Supply Design: Load Step Response with a SIGLENT DC Electronic Load https://siglentna.com/video/power-supply-design-load-step-response-with-a-siglent-dc-electronic-load/ Fri, 03 Apr 2020 11:59:30 +0000 https://siglentna.com/?post_type=videos&p=17283 In this video, I compare the response from two power supplies using a stepped load to show the differences between a well-tuned supply and one that exhibits excessive ringing. Also, add in some basic instrument requirements to help get you started making your own step load tests. Here, I use a SIGLENT SDL1X-E DC Electronic … Continued

The post Power Supply Design: Load Step Response with a SIGLENT DC Electronic Load appeared first on Siglent.

]]> In this video, I compare the response from two power supplies using a stepped load to show the differences between a well-tuned supply and one that exhibits excessive ringing. Also, add in some basic instrument requirements to help get you started making your own step load tests.

Here, I use a SIGLENT SDL1X-E DC Electronic load to perform the dynamic load requirements, an SPD1168X power supply to power the board, a CP4070 current probe to monitor the load current, and a SIGLENT SDS2354X Plus oscilloscope to measure the response and perform some averaging to clean up noise.

There is also an app note with more details on instrument setup: DC Load Step Response

The post Power Supply Design: Load Step Response with a SIGLENT DC Electronic Load appeared first on Siglent.

]]> SDS1004/SDS2000X-E series Embedded Web Control https://siglentna.com/video/sds1004-sds2000x-e-series-embedded-web-control/ Tue, 05 Nov 2019 12:32:21 +0000 https://siglentna.com/?post_type=videos&p=15708 The SIGLENT SDS1004X-E series (4 channel only. Does not apply to the SDS1202X-E), SDS2000X-E, SDS2000X Plus, SDS5000X, and SDS6000A series of oscilloscopes feature a web control interface that provides remote instrument control without additional software. In this video, we show you how to configure the scope for wired LAN or wireless WiFi connection and an … Continued

The post SDS1004/SDS2000X-E series Embedded Web Control appeared first on Siglent.

]]> The SIGLENT SDS1004X-E series (4 channel only. Does not apply to the SDS1202X-E), SDS2000X-E, SDS2000X Plus, SDS5000X, and SDS6000A series of oscilloscopes feature a web control interface that provides remote instrument control without additional software.

In this video, we show you how to configure the scope for wired LAN or wireless WiFi connection and an overview of the basic features of the web browser program.

UPDATE 06/2018: New Firmware/OS updates improve speed and performance. Check it out here

The post SDS1004/SDS2000X-E series Embedded Web Control appeared first on Siglent.

]]> SDS1X-E Bode II Testing by Chris Grossman https://siglentna.com/video/bode-ii-testing-by-chris-grossman/ Thu, 08 Aug 2019 14:27:18 +0000 https://siglentna.com/?post_type=videos&p=14802 Chris Grossman (@batray) reviews the SIGLENT Bode II capabilities that were added with the four-channel XE firmware version 6.1.33: This function also applies to the following oscilloscope and generator series: SDS2000X-E SDS2000 X Plus SDS5000X SDS6000A SDG1000X SDG2000X SDG6000X SDG7000A

The post SDS1X-E Bode II Testing by Chris Grossman appeared first on Siglent.

]]> Chris Grossman (@batray) reviews the SIGLENT Bode II capabilities that were added with the four-channel XE firmware version 6.1.33:

This function also applies to the following oscilloscope and generator series:

SDS2000X-E

SDS2000 X Plus

SDS5000X

SDS6000A

SDG1000X

SDG2000X

SDG6000X

SDG7000A

The post SDS1X-E Bode II Testing by Chris Grossman appeared first on Siglent.

]]> Frequency Response Curves (Bode Plot) using an Oscilloscope and Function Generator https://siglentna.com/video/bode-plot-oscilloscope-generator/ Mon, 17 Sep 2018 13:08:30 +0000 http://siglentna.com/?post_type=videos&p=7163 In this video, we show how to use the automated Bode Plot feature of the SIGLENT SDS1004X-E series of four-channel oscilloscopes to create a frequency response curve. This function also applies to the following oscilloscope and generator series: SDS2000X-E SDS2000 X Plus SDS2000X HD SDS5000X SDS6000A SDG1000X SDG2000X SDG6000X SDG7000A SAG1021 SAG1021i   There is … Continued

The post Frequency Response Curves (Bode Plot) using an Oscilloscope and Function Generator appeared first on Siglent.

]]> In this video, we show how to use the automated Bode Plot feature of the SIGLENT SDS1004X-E series of four-channel oscilloscopes to create a frequency response curve.

This function also applies to the following oscilloscope and generator series:

SDS2000X-E

SDS2000 X Plus

SDS2000X HD

SDS5000X

SDS6000A

SDG1000X

SDG2000X

SDG6000X

SDG7000A

SAG1021

SAG1021i

 

There is also an application note that covers an identical topic:

Bode Plot App Note

The post Frequency Response Curves (Bode Plot) using an Oscilloscope and Function Generator appeared first on Siglent.

]]> SDS1004/SDS2000X-E series Embedded Web Control https://siglentna.com/video/sds1004x-e-embedded-web-control/ Fri, 02 Mar 2018 19:33:52 +0000 http://siglentna.com/?post_type=videos&p=5742 The SIGLENT SDS1004X-E series (4 channel only. Does not apply to the SDS1202X-E), SDS2000X-E, SDS2000X Plus, SDS5000X, and SDS6000A series of oscilloscopes feature a web control interface that provides remote instrument control without additional software. In this video, we show you how to configure the scope for wired LAN or wireless WiFi connection and an … Continued

The post SDS1004/SDS2000X-E series Embedded Web Control appeared first on Siglent.

]]> The SIGLENT SDS1004X-E series (4 channel only. Does not apply to the SDS1202X-E), SDS2000X-E, SDS2000X Plus, SDS5000X, and SDS6000A series of oscilloscopes feature a web control interface that provides remote instrument control without additional software.

In this video, we show you how to configure the scope for wired LAN or wireless WiFi connection and an overview of the basic features of the web browser program.

UPDATE 06/2018: New Firmware/OS updates improve speed and performance. Check it out here

 

The post SDS1004/SDS2000X-E series Embedded Web Control appeared first on Siglent.

]]>