SDG6000X Series Pulse/Arbitrary Waveform Generator

Up-to 500 MHz Sine Wave

Our highest frequency generator. Novel design delivers higher voltages over a  broad range of frequencies.

Adjustable Pulse Width

The pulse width can be fine-tuned to the minimum of 3.3 ns with an adjustment step as small as 100 ps, at any frequency.

Adjustable Pulse Edges

The rise/fall times can be set independently to the minimum of 1 ns at any frequency with a minimum adjustment step as small as 100 ps

Low Jitter

When a Square/Pulse waveform is generated by traditional DDS, there can be additional jitter if the sampling rate is not an integerrelated multiple of the output frequency. EasyPulse technology successfully overcomes this weakness in DDS designs and helps to produce low jitter Square/Pulse waveforms.

Point-by-Point Output

TrueArb generates arbitrary waveforms point-by-point. It never skips any point so that it can reconstruct all the details of the waveform, as defined. Two interpolation modes are available: linear and zero-order hold.

Create Waveforms Using EasyWave Software

EasyWave is an arbitrary waveform software platform that supports waveform creation and editing. It features manual drawing, as-wellas line, equation, and coordinate editing modes. It is also a convenient way for users to edit their own arbitrary waveforms.

Easily Add Noise

Gaussian noise with bandwidth up to 500 MHz. The repetition period is more than 100 years, and the bandwidth is adjustable. Wideband Gaussian noise can be easily added to other waveforms to simulate real-world scenarios in which the signal contains a large degree of noise.

IQ Modulation (optional)

The SDG6000X supports popular modulation types such as ASK, FSK, PSK, and QAM. Proprietary resampling technology provides excellent EVM performance at arbitrary symbol rates between 250 Symb/s – 37.5 MSymb/s. Built-in digital quadrature modulator provides the possibility to generate IQ signals from baseband to 500 MHz intermediate frequency.

Generate Modulation Waveforms with Easy IQ software (optional)

IQ waveforms can be generated by EasyIQ software.

Generate PRBS signals

PRBS3 – PRBS32 with finely adjustable 10^-6 bps – 300 Mbps bit rate and 1 ns – 1us edge.

PRBS

Preset common logic levels such as TTL, LVCMOS, LVPECL and LVDS. An added differential mode provides an easy way to generate differential signals using the both channels.

Large Signals at High Frequencies

Dual-channel, 20 Vpp amplitude sine wave guaranteed at up to 40 MHz.

Generate low amplitude signals

Low noise floor, improves signal-to-noise ratio.

Exetensive Modulation selection

Standard modulation types include AM, FM, PM, FSK, ASK, PSK, DSBAM, and PWM are supported. IQ modulation is optional. The modulation source can also be configured as “Internal” or “External”.

Sweep and Burst

Sweep modes include “Linear” and “Log”. Burst modes includes “N cycle” and “Gated”. Both Sweep and Burst can be triggered by “Internal” , “External” or “Manual” source.

Waveform Combining

The waveform combining function superimposes CH1 and CH2 waveforms internally and provides the combined waveform to a user-selected output. Easily combine basic waveforms, random noise, modulation signals, sweep signals, burst signals, EasyPulse waveforms and TrueArb waveforms

Harmonics Function

Harmonics function gives you the ability to add higher-order elements to your signal.

Two Dual-channel Operation Modes

“Phase-Locked” mode automatically aligns the phases of each output.

While “Independent” mode permit the two channels to be used as two independent generators. Independent mode also smoothes parameter (frequency, amplitude) changes made to an active channel.

Frequency Counter

8-digit hardware frequency counter with statistics function and input range of 0.1 Hz – 400 MHz.