SSM5000A Switch Matrix

  • Maximum frequency: 9 GHz/ 26.5 GHz
  • Maximum number of input ports: 4
  • Maximum number of output ports: 24
  • RF connector: 3.5mm female
  • Support a simplified multi-port calibration algorithm
  • Interface: LAN, USB Device, Direct Control (in), Direct Control (out)

Product Overview

SSM5000A series switch matrix can expand the number of test ports of network analyzer, signal source, spectrum analyzer and other equipment. And the series are with up to 4 input ports and up to 24 output ports, supporting USB, LAN, Direct Control communication modes. The Direct Control interface on the switch matrix can further expand the number of test ports and support a simplified multi-port calibration algorithm, which can greatly improve the efficiency of calibration. In addition to SIGLENT instruments, it also supports other mainstream instruments. It is suitable for 19-inch standard chassis and can be widely used in multi-port test environments such as antennas and 5G component modules.

Frequency Range Inputs Outputs Maximum Input
DC Voltage
Maximum Input Power Price
SSM5122A 9 kHz-9 GHz 2 12 35V 20dBm $8,590 Buy Now
SSM5124A 9 kHz-9 GHz 2 24 35V 20dBm $17,217 Buy Now
SSM5142A 9 kHz-9 GHz 4 12 35V 20dBm $9,428 Buy Now
SSM5144A 9 kHz-9 GHz 4 24 35V 20dBm $18,281 Buy Now
SSM5321A 100 kHz-26.5 GHz 2 6 35V 20dBm $11,047 Buy Now
SSM5342A 100 kHz-26.5 GHz 4 12 35V 20dBm $14,090 Buy Now

Key Features

  • Maximum frequency: 9 GHz/ 26.5 GHz
  • Maximum number of input ports: 4
  • Maximum number of output ports: 24
  • RF connector: 3.5mm female
  • Screen size: 2.4-inch
  • Maximum input power: 20 dBm
  • Characteristic impedance: 50 Ω
  • Maximum input DC voltage: 35 V
  • Size: W×H×D=88.5×425×417.6mm
  • Support a simplified multi-port calibration algorithm
  • Interface: LAN, USB Device, Direct Control (in), Direct Control (out)

Need more information? Call us now 877-515-5551

Product Characteristics

Easily Meet Multi-port Test Requirements View more

Easily Meet Multi-port Test Requirements

Easily Meet Multi-port Test Requirements

SSM5000A series switch matrix can expand the number of test ports of network analyzer, signal source, spectrum analyzer and other equipment. And the series are with up to 4 input ports and up to 24 output ports, supporting USB, LAN, Direct Control communication modes. In addition to SIGLENT instruments, it also supports other mainstream instruments. It is suitable for 19-inch standard chassis and can be widely used in multi-port test environments such as antennas and 5G component modules.

Network Analyzer Test Port Extension View more

Network Analyzer Test Port Extension

Network Analyzer Test Port Extension

The switch matrix is used to expand the test ports of network analyzer and measure S parameters of multiple devices, according to the specific test requirements, the matrix switch can be extended into 24 single ports, 12 full 2 ports, 8 full 3 ports, 6 full 4 ports, 4 full 6 ports, 3 full 8 ports, 2 full 12 ports, 1 full 24 ports, etc. The figure below shows scaling to 4 full 6 ports. DUT1 , DUT2 , DUT3 and DUT4 devices can be tested by software, greatly improving the test efficiency.

Signal Generator and SA Test Port Extension View more

Signal Generator and SA Test Port Extension

Signal Generator and SA Test Port Extension

Using a switch matrix with a signal source and spectrum analyzer, the signal source and spectrum analyzer are extended to 24 ports, which can be used to test the transmission and reception of multiple DUTs. When testing the emission index, the software switches to 24 ports in turn, then the expansion of the signal source is completed; when testing the receiving index, the software can also switch to 24 ports in turn to complete the expansion of the spectrum analyzer. The matrix switch can greatly reduce the number of signal source and spectrum analyzer, save cost and improve test efficiency.

Standard Accessories

Quick start

Power cord

USB cable

Support and Resources

Application Notes

US