VNC Viewer for easy LAN control of multiple instruments
October 6, 2022
In this video, I connect an SDS6000A series oscilloscope and SDG7000A series arbitrary waveform generator to a computer using a LAN and highlight some of the features of a commercially available VNC(r) software tool. If you are remotely monitoring instrumentation, these types of tools can be very helpful in displaying information.
HRWB: Intro to Diplexers
June 1, 2022
George Zafiropolous from The Ham Radio Work Bench discusses filters including diplexers, triplexers, and more.. and uses a SIGLENT SVA1015X to perform some basic filter measurements: The Ham Radio podcast deep dives on making, DIY, electronics, and technical topics of interest to the amateur radio operator. Your host, George KJ6VU, discusses current developments in ham … Continued
RF cable and adapter cleaning and stability check using a VNA
December 10, 2021
In this video, we introduce techniques for inspecting, cleaning, and evaluating the quality of RF cables and connectors. We also introduce a simple method of determining the quality and stability of a cable using a vector network analyzer (VNA) to perform an S11 measurement and open, short, load calibration.
How accurate are your pre-compliance conducted emissions test results?
December 9, 2021
In this video, Dr. Min Zhang from Mach One Design EMC consulting demonstrates the accuracy of his conducted noise pre-compliance test set-up, consisting of a Siglent spectrum analyzer, a Tekbox TBOH01 LISN, EMCview software, and a shielded tent and compares it to results from an accredited compliance lab. Chapters: 0:00 Automotive Conducted Emission Test Set-up … Continued
EMI Precompliance: 9 Simple Tricks to Improve EMC / EMI on Your Boards
October 6, 2021
In this video, Robert Feranec and Min Zhang introduce common design decisions that can influence the EMI generated and solutions to the most common problems.
Precompliance: Conducted Emissions Setup
June 22, 2021
In this video, Min Zhang of Mach One Design demonstrates how to perform a conducted emission pre-compliance EMC test for a mains-powered home appliance product. A step-by-step guide to set the test up, benchmark the test results, and use Tekbox EMCview software to achieve highly efficient spectrum scanning. For EMC, power converter, motor drive, and … Continued
Wireless communications troubleshooting
April 22, 2021
In this video, Patrik Gold from SIGLENT EU presents common issues with wireless communications and strategies to improve performance through basic testing. Perfect for IOT development. Originally presented at the Embedded Forum at virtual Electronica 2020.
How to observe demodulated audio from a spectrum analyzer
December 16, 2020
Viewing demodulated audio can be important when troubleshooting a transmitter. In this video, I demodulate an FM radio station using a SIGLENT spectrum analyzer and view the output signal on an oscilloscope.
Distance-to-Fault cable testing with the SVA1000X
March 3, 2020
In this video, we use the Distance-to-Fault (DTF) function available on the SIGLENT SVA1000X Spectrum and Vector Network Analyzer instruments to test a few sections of coaxial cabling. DTF uses frequency domain reflectometry (FDR) to highlight impedance differences along a length of cable. This can be used to determine the distance to adapters, faults, and … Continued
SVA1015X firmware revision 2. 2.1.2.1 review and update from Chris Grossman
November 20, 2019
Our development team was working on a new revision (V2.2.1.2.1) that includes the following updates: New Functionality: Add CNR, Harmonic measurement in AMK options for SA Mode Add port extensions, user cal kit, new marker functions, correction switch, multi-traces and multi-format overlay display for VNA Mode Extend xQAM, MSK, xPSK modulation analysis in DMA option … Continued