SDS2000X HD Digital Storage Oscilloscope
- 200 and 350 MHz models
- 12-bit High Resolution
- Record Length up to 200 Mpts
- Waveform capture rate up to 500,000 wfm/s (Sequence mode)
- Sampling rate up to 2 GSa/s (interleaving mode）
- Large 10.1” TFT-LCD display with 1024 * 600 resolution
- Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester
Product Overview
SIGLENT’s SDS2000X high-resolution digital oscilloscopes are based on 2 GSa/s, 12-bit Analog to Digital converters and front ends with excellent noise floor performance. SDS2000X HD oscilloscopes are available in bandwidths of 350 MHz and 200 MHz, have a maximum record length of 200 Mpts/ch, and display 4 analog channels + 16 digital channels mixed-signal analysis ability.
The SDS2000X HD series employs Siglent’s SPO technology with a maximum waveform capture rate of up to 100,000 wfm/s (normal mode, up to 500,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a color temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. Tools such as History waveform recording, Search and Navigate functions, Mask Test, Bode Plot, Power Analysis and Histogram allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 25 MHz arbitrary waveform generator, as well as serial decoding are also features of the SDS2000X HD digital oscilloscope.
The large 10.1’’ display capacitive touch screen supports multitouch gestures, with the addition of a user-friendly UI design, which can greatly improve the operation efficiency. It also supports mouse control and remote web control over LAN.
Key Features
- 12-bit High Resolution
- 12-bit Analog-Digital Convertors with sample rate up to 2 GSa/s
- Front ends with 70 μVrms noise floor @ 500 MHz bandwidth and 0.5% DC gain accuracy
- 4 analog channels, up to 350 MHz bandwidth (upgradable to 500 MHz)
- SPO technology
- Waveform capture rate up to 100,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode)
- Supports 256-level intensity grading and color temperature display modes
- Up to 200 Mpts/ch record length
- Digital trigger system
- Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported). Zone Trigger simplifies advanced triggering
- Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester
- Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
- History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
- Automatic measurements on 50+ parameters, supports statistics with histogram, track, trend, Gating measurement, and measurements on Math, History and Ref
- 2 Math traces (2 Mpts FFT, addition, subtraction, multiplication, division, integration, differential, square root, etc.), supports formula editor
- Abundant data analysis functions such as Search, Navigate, Digital Voltmeter, Counter, Waveform Histogram, Bode plot and Power Analysis
- High Speed hardware-based Average, ERES; High Speed hardware-based Mask Test function, with Mask Editor tool for creating user-defined masks
- 16 digital channels
- Built-in 25 MHz waveform generator
- Large 10.1” TFT-LCD display with 1024 * 600 resolution; Capacitive touch screen supports multi-touch gestures
- Interfaces include: USB Hosts, USB Device (USBTMC), LAN (VXI-11/Telnet/Socket), Pass/Fail, Trigger Out
- Built-in web server supports remote control over the LAN port using a web browser. Supports SCPI remote control commands. Supports external mouse and keyboard
The new 12-bit resolution SIGLENT HD oscilloscope has been an awesome addition to my lab bench. With greater dynamic range, lower noise floor, and larger offset adjustability of the SIGLENT HD compared to my old Tek DPO scope, I can isolate and view high-frequency signals on my PCB with much greater clarity.
With the SIGLENT HD I have been able to:
- Isolate and mitigate high-frequency ringing and noise more quickly and easily.
- Tune snubber circuits more quickly and accurately.
- Run more accurate transient response tests.
- Easily measure switch node jitter and unexpected circuit glitches with the deep memory.
- Use the internal function generator and Bode Analysis Mode to measure power supply control loops in circuit.
Highly recommended!!
– Andrew, FAE at a leading semiconductor company June, 2022
Product Characteristics
12-bit High Resolution View more
High Waveform Update Rate View more
Deep Record Length View more
Multiple Trigger Functions View more
Trigger Zone View more
Advanced Math Function View more
Measurements of a Variety of Parameters View more
Parameter Statistics Function View more
History Mode View more
Sequence Mode View more
Search and Navigate View more
Serial Bus Decode View more
Hardware-based High-Speed Mask Test Function View more
Bode Plot View more
Power Analysis (Optional) View more
Digital Channels / MSO (Optional) View more
Built-in 25 MHz Waveform Generator (Optional) View more
Complete Connectivity View more
Standard Accessories
USB Cable
Passive Probes
Wireless Mouse
Quick start-SDS2000X HD
Certificate of calibration-SDS2000X HD
