Maximum Source Frequency for Bode Plotting with an SDS1104X-E, SDS1204X-E, SDS2000X-E Series, SDS2000X Plus/HD Series, or SDS5000X Series Oscilloscope
December 15, 2020
Due to channel skew, Bode plotting is limited to 120 MHz for the following products: SDS1104X-E SDS1204X-E SDS2000X-E Series SDS2000X Plus Series SDS2000X HD SDS5000X Series SDS6000A
More on Trigger Status Messages
August 8, 2019
There are 6 types of trigger status messages for the SIGLENT SDS series of oscilloscopes. The trigger status indication is located near the upper-right-hand side of the display, as indicated in this picture: Here are their definitions: Armed. The oscilloscope is acquiring pre-trigger data. All triggers are ignored in this state. Ready. All pre-trigger data … Continued
Currently supported instruments for use with the SIGLENT USB-GPIB adapter
August 8, 2019
The SIGLENT USB-GPIB adaptor currently works with the following SIGLENT instruments: Multimeters – SDM3065X/SDM3065X-SC SDM3055/SDM3055-SC SDM3045X Function/Arbitrary waveform generators – SDG6000X Series SDG5000 Series SDG2000X Series SDG1000X Series SDG1000 Series RF Generators – SSG3000X/-IQE Series SSG5000X/-V Series Spectrum & vector network analyzers – SSA3000X Series SSA3000X Plus Series SVA1000X Series Oscilloscopes … Continued
USB host connector power limits for instrumentation
June 14, 2019
SIGLENT instruments with USB ports can supply 500mA steady current at 5 V.
Oscilloscope Specifications: What does “div” mean in the specifications?
February 27, 2019
The term “div” for most SIGLENT specifications is equal to the Vertical Scale value (Commonly shown in units of Volts/div). Take the specification for the DC Gain Accuracy of a SIGLENT SDS1052DL+ For ranges ≤ 100 mV/div, the DC Gain Accuracy is given as ± [3% × (|reading|+|offset|) +1% × |offset| +0.2 * div+2 mV] If: Reading = 0.5 … Continued
SDS5000X Security Erase Process
February 12, 2019
In some instances, you may wish to clear all of the available memory on an instrument to prevent anyone from seeing the data or information. Here are the steps to securely erase the memory modules within the SIGLENT SDS5000X Oscilloscope Series: Press Utility > Save/Recall > Recall > Type = Security Erase > Press Recall
Where do I find environmental, EMC, and other compliance information for your products?
January 10, 2019
Information regarding product compliance is available on the datasheet for each product. Contact your local Siglent office for more details if you have trouble finding what you need. You can also write support@siglentna.com
Are your instruments FCC compliant?
December 14, 2018
Test and measurement equipment is exempt from FCC emissions limits per CFR 47, Part 15, para 15.103(c): https://www.gpo.gov/fdsys/pkg/CFR-2002-title47-vol1/pdf/CFR-2002-title47-vol1-sec15-103.pdf Specifically: “(c) A digital device used exclusively as industrial, commercial, or medical test equipment.”
The number of data points for low, medium, and high resolution Bode Plot scans X-E series oscilloscopes
November 28, 2018
The following SIGLENT series of oscilloscopes feature Bode Plot capability for quickly collecting frequency response data on devices.: SDS1104/1204X-E SDS2000X-E SDS2000 X Plus SDS5000X SDS6000A There are three frequency sweep resolutions available: Low Resolution = 21 data points/sweep Medium Resolution = 101 data points/sweep High Resolution = 501 data points/sweep
Web browser buttons are not functioning/do not click with Google Chrome or Firefox
August 8, 2018
Some of our products, including the SVA1015X spectrum analyzer/VNA have an onboard webpage that enables remote device configuration and control using nothing more than a web browser and a LAN connection. Some settings in the browser can leave these on-screen buttons non-functional. An icon appears on the computer display and it can be moved using … Continued