SDS2000X Plus Super Phosphor Oscilloscopes

  • 100 MHz, 200 MHz, 350 MHz (upgradable to 500 MHz) models
  • Real-time sampling rate up to 2 GSa/s
  • Record length up to 200 Mpts
  • Serial bus triggering and decoder, supports I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S and MIL-STD-1553B
  • 10-bit mode, Vertical and Horizontal Zoom
  • Capacitive touch screen supports multi-touch gestures

Product Overview

SIGLENT’s SDS2000X Plus series Digital Storage Oscilloscopes are available in bandwidths of 350 MHz, 200 MHz and 100 MHz, have a maximum sample rate of 2 GSa/s, maximum record length of 200 Mpts/ch, and up to 4 analog channels + 16 digital channels mixed signal analysis ability.

The SDS2000X Plus series employs SIGLENT’s SPO technology with a maximum waveform capture rate of up to 120,000 wfm/s (normal mode, up to 500,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a color temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. History waveform recording, Sequence acquisition, Search and Navigate functions allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 50 MHz waveform generator, as well as serial decoding, mask test, bode plot, and power analysis are also features of the SDS2000X Plus. A 10-bit acquisition mode helps to satisfy applications which require more than 8-bit resolution.

The large 10.1’’ capacitive touch screen supports multi-touch gestures, while the remote web control, mouse and external keyboard support greatly improve the operating efficiency of the SDS2000X Plus.

Having trouble deciding which scope is right for you?

Click to view a comparison table of our most powerful scopes.

Bandwidth Channels Real time
sampling rate
Capture rate Memory depth Price
SDS2354X Plus 350 MHz 4+EXT 2 GSa/s 120,000 wfm/s 200 Mpts/ch $2,999 Buy Now
SDS2204X Plus 200 MHz 4+EXT 2 GSa/s 120,000 wfm/s 200 Mpts/ch $2,199 Buy Now
SDS2104X Plus 100 MHz 4+EXT 2 GSa/s 120,000 wfm/s 200 Mpts/ch $1,399 Buy Now
SDS2102X Plus 100 MHz 2+EXT 2 GSa/s 120,000 wfm/s 200 Mpts/ch $1,099 Discontinued

Key Features

  • 350 MHz, 200 MHz, 100 MHz models with real-time sample rate up to 2 GSa/s. A 500 MHz bandwidth upgrade option is available for 350 MHz models.
  • SPO technology
    • Waveform capture rates up to 120,000 wfm/s (normal mode) and 500,000 wfm/s (sequence mode)
    • Supports 256-level intensity grading and color temperature display modes
    • Record length up to 200 Mpts/ch, 400 Mpts in total for all 4 channels
    • Digital trigger system
  • Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern and Video (HDTV supported). Trigger zone helps to simplify advanced triggering
  • Serial bus triggering and decoder, supports I2C, SPI, UART, CAN, LIN (Standard) and CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, and Manchester (optional) protocols
  • Low background noise, features 0.5 mV/div to 10 V/div voltage scales
  • 10-bit mode provides higher resolution and lower noise
  • Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 90,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
  • History waveform record (History) function for up to 90,000 triggered waveforms (frames)
  • Automatic measurement function on 50+ parameters, supports statistics with histogram and trend
  • Two Math traces, support 2 Mpts FFT, +, -, x, ÷, d/dt, ∫dt, √, average, ERES, and formula editor
  • Abundant data processing and analysis functions such as Search, Navigate, Mask Test, Bode plot, Power Analysis (optional) and Counter
  • 16 digital channels
  • Built-in 50 MHz waveform generator (optional)
  • Large 10.1” TFT-LCD display with 1024×600 resolution; Capacitive touch screen supports multi-touch gestures
  • Multiple interfaces: USB Host, USB Device (USBTMC), LAN(VXI-11/Telnet/Socket), Pass/Fail, Trigger Out
  • Built-in web server supports remote control by the LAN port using a web browser; Supports SCPI remote control commands

Need more information? Call us now 877-515-5551

Product Characteristics

Competitive Front End Performance View more

Competitive Front End Performance

Competitive Front End Performance

500 MHz bandwidth (at 2 GSa/s sample rate with 500 MHz bandwidth option).

SDS2000X Plus at 500 MHz

Up to 120,000 wfm/s waveform update rate View more

Up to 120,000 wfm/s waveform update rate

Up to 120,000 wfm/s waveform update rate

With a waveform update rate of up to 120,000 wfm/s, the oscilloscope can easily capture low-probability events. In Sequence mode the waveform capture rate can reach 500,000 wfm/s

Record Length of up to 200 Mpts/ch View more

Record Length of up to 200 Mpts/ch

Record Length of up to 200 Mpts/ch

Utilizing a hardware-based Zoom technique and record length up to 200 Mpts, users can select a slower timebase without compromising the sample rate and then quickly zoom in to focus on the area of interest.

10-bit Mode View more

10-bit Mode

10-bit Mode

SDS2000X Plus 10-bit mode with Zoom

10-bit mode combined with Zoom shows you more details and less noise on the waveform.

Multiple Trigger Functions View more

Multiple Trigger Functions

Multiple Trigger Functions

Edge, Slope, Pulse, Video, Windows, Runt, Interval, Dropout, Pattern and serial trigger.

Trigger Zone View more

Trigger Zone

Trigger Zone

Trigger Zone is available for advanced triggering.

Measurements for All relevant Parameters and Parameter Statistics View more

Measurements for All relevant Parameters and Parameter Statistics

Measurements for All relevant Parameters and Parameter Statistics

SDS2000X Plus measurements

Siglent SDS2000X Plus measurements

SDS2000X Plus Phase and Skew measurements

Siglent SDS2000X Plus oscilloscope measurements

Parameter measurements includes 4 categories: horizontal, vertical, miscellaneous and channel delay providing a total of 50+ different types of measurements. Measurements can be performed within a specified gate period. Measurements on Math, Reference and History frames are supported.

Statistics shows the current value, maximum value, minimum value, standard deviation and mean value of up to 12 parameters simultaneously. Histogram is available to show the probability distribution of a parameter. Trend is available to show the parameter value vs. time.

In addition, horizontal measurements can process up to 1000 signal edges within one single frame, thus greatly improving the test efficiency.

Advanced Math Function View more

Advanced Math Function

Advanced Math Function

Two Math traces, support FFT, +, -, x, ÷, d/dt, ∫dt, √, average, ERES, and formula editor.

SDS2000X Plus math function

Hardware accelerated FFT up to 2 Mpts. This provides high frequency resolution with fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectrum measurement needs. Three modes (Normal, Average and Max hold) can satisfy different requirements for observing the power spectrum. Auto peak detection and markers are supported.

History Mode View more

History Mode

History Mode

History function records up to 90,000 triggered waveforms (frames). This is done continuously in the background, so the history waveforms can be played back at any time to find and analyze past events. Serial decode, zoom and cursors measurements can be used.

Sequence Mode View more

Sequence Mode

Sequence Mode

Segmented memory collection will store the waveform into multiple memory segments (up to 90,000) and each segment will store a triggered waveform together with the dead time information. The interval between segments can be as small as 2 µs. All segments can be played back at an arbitrary framerate using the History function.

Search and Navigate View more

Search and Navigate

Search and Navigate

The SDS2000X Plus oscilloscope can find events within a record and history based on user specified trigger conditions. Navigate browses through Events flagged by the Search, plays back history frames or continuously moves the delay position on long records (useful in zoom view).

Serial Bus Decode View more

Serial Bus Decode

Serial Bus Decode

In addition to the decoder lanes correlated to the waveform, bus protocol information can be displayed in tabular form. I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S and MIL-STD-1553B are supported.

Hardware-based High Speed Mask Test Function View more

Hardware-based High Speed Mask Test Function

Hardware-based High Speed Mask Test Function

The SDS2000X Plus utilizes a hardware-based Mask Test function, performing up to 80,000 Pass / Fail decisions each second. It is easy to generate user defined test templates which the signal trace can be continuously compared to. The failed frames can be automatically stored as history frames or screen shots, making it suitable for long-term signal monitoring or automated production line testing.

Built-in Mask Editor application helps to create custom masks.

Bode Plot View more

Bode Plot

Bode Plot

The SDS2000X Plus can control the built-in waveform generator or any stand-alone SIGLENT SDG device to scan the amplitude and phase response over frequency of passive or active circuits. The data is presented as Bode Plot. This makes it possible to replace expensive network analyzers in less demanding applications.

Power Analysis (Optional) View more

Power Analysis (Optional)

Power Analysis (Optional)

The Power Analysis option provides a full suite of power measurements and analysis, thus improving the efficiency of measurement in switching power supplies and power device designs.

Digital Channels / MSO (Optional) View more

Digital Channels / MSO (Optional)

Digital Channels / MSO (Optional)

Four analog channels plus 16 digital channels allow the acquisition and triggering of mixed waveforms with one instrument.

50 MHz Built-in Waveform Generator (Optional) View more

50 MHz Built-in Waveform Generator (Optional)

50 MHz Built-in Waveform Generator (Optional)

The built-in waveform generator can output waveforms with up to 50 MHz frequency and ±3 V amplitude. Six basic waveforms together with multiple types of predefined waveforms and as user defined arbitrary waveforms are supported.

Complete Connectivity View more

Complete Connectivity

Complete Connectivity

2 x USB Host, 1 x USB Device (USBTMC)

1 x LAN(VXI-11/Telnet/Socket)

1 x Auxiliary Output(Pass/Fail and Trigger Out)

Standard Accessories

USB Cable

USB Cable

Quick Start Guide-SDS2KXP

100/200 MHz models: PP215 Probes 350 MHz models: SP2035A Probes

Support and Resources

Application Notes

Power Supply Design: Load Step Response with a SIGLENT DC Electronic Load

Download PDF Building a power supply that can handle various loads without oscillating can be a challenge. Computational models and computer simulations can help get your design headed in the right direction, but physical testing is essential to proving the performance of your design. One method of quickly determining stability is to use a load … Continued

Analyzing GSM Radio Protocol with a Siglent SDS2000X Plus Oscilloscope

Download PDF Two SIGLENT users, Karel and Simon Sotek, email2@avanaconsulting.de recently took a SIGLENT SDS2354X Plus oscilloscope and investigated a GSM cell phone signal. Here is their report: We took a retired Siemens A36 cellphone to learn the capabilities of this new Siglent scope. Available documentation and medium-density PCB of the selected A36 made the … Continued

Bode Plot of a filter using an oscilloscope and function generator

Download PDF A Bode plot is a method of graphically displaying the frequency response of a system or device-under-test (DUT). Commonly, the magnitude and phase response of the device are plotted with respect to frequency using a shared horizontal frequency axis as shown in the example below:   By showing both the magnitude and phase … Continued
US