SSA3000X File Types
October 25, 2017
The SSA3000X can save files in a number of formats that can be useful for saving/recalling configurations, correction and limits, as well as raw trace data. Those include: – State files (*.STA file extension): These files can be used to save and recall the instrument configuration. They are saved in binary format, which is designed … Continued
How to save a file with the SSA3000X
October 25, 2017
The SSA3000X can save a number of file types to either internal memory or an external USB memory device. Here are instructions on how to view and save files: – If you intended to save to an external device, insert a USB memory device into the front panel USB slot. – Press File located on … Continued
SSA3000X External Reference Clock Recommendations
October 25, 2017
The external clock input of the SSA3000X series of spectrum analyzers has the following specifications: External Clock Input: 1-5 Vp, 10 MHz, edge-detected, sine (preferred). Square waves containing a 10 MHz rising edge can work, but harmonics may affect performance. Clock Output: Approximately 1 Vp (0-1 V), 10 MHz sine wave.
How do I check the options on an SSA3000X Series Spectrum Analyzer?
October 24, 2017
The SIGLENT SSA3000X series of spectrum analyzers are available with a number of options that can assist in performing certain measurement and test functions. To check the current status of an option: 1. Press SYSTEM on the front panel 2. Press the System Info softkey 3. The options and current status’ are similar to those … Continued
Getting Started with EasySpectrum Software
October 23, 2017
EasySpectrum software provides a remote control interface for SIGLENT SSA3000 Series of spectrum analyzers that can be used to ease data collection, remote monitoring, and pre-compliance test sequencing. The software consists of two basic control modes: Monitor A virtual front panel mode that enables users to see the spectral traces in real time as well … Continued
Limit Lines on the SSA3000X Spectrum Analyzer
October 23, 2017
The SIGLENT SSA3000X series of spectrum analyzers feature two limit lines that can be used to visually identify whether a signal or spectrograph meets or exceeds given parameters. Limit lines can be used for: – EMI Pre-compliance measurements using FCC/CISPR limit lines – Transmitter testing: Is the signal in the proper band? – AM NRSC … Continued
Calibration Traceability
October 23, 2017
Excerpt from the ANSI-ASQ National Accreditation Board: http://anab.org/news/newsletter/winter-2014/nist-traceability-statements NIST Traceability Statements Many calibration customers request on their accredited calibration certificates a statement that the measurement is traceable to the National Institute of Standards and Technology (NIST). They want assurance that the standards used for the calibration are ultimately traceable to the International System of Units … Continued
Do all SIGLENT products support SCPI?
September 29, 2017
What instruments accept SCPI commands for remote control? All SIGLENT instruments (except for the SHS1000 and SHS800 hand-held oscilloscopes) support SCPI remote control commands. For more information, download the specific instrument programming guide located on the product page.